Testseek.dk har samlet 34 ekspertanmeldelser af XYZprinting da Vinci 1.0 og den gennemsnitlige bedømmelse er 73%. Rul ned og se alle anmeldelser for XYZprinting da Vinci 1.0.
(73%)
34 Tester
Gennemsnitlig bedømmelse fra eksperter, der har anmeldt dette produkt.
Brugere
(65%)
60 Tester
Gennemsnitlig bedømmelse af ejere af produktet.
73010034
Tester
side 2 af 4
Sorter efter:
Bedømmelse
Udgivet: 2014-11-21, Forfatter: Steven , anmeldelse af: tweaktown.com
The whole notion of a device that prints objects might seem complicated to any novice who wants to get into 3D printing; however, the Da Vinci 1.0 really makes setup and operation as simple as possible. The Da Vinci 1.0 comes pre built, pre-calibrated, a...
The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform, it's ready to use right out of the box, and it's priced much lower than competing devices
The machine uses XYZprinting proprietary consumables, and you can't swap filaments during a print job. Its print-platform is not removable, making it hard to clean
Affordable, reliable, and easy to use, the XYZprinting Da Vinci 1.0 AiO 3D Printer is great leap toward making 3D printing available to the masses....
Udgivet: 2016-02-05, Forfatter: Eric , anmeldelse af: uk.hardware.info
The printers which we tested ranged from around 400 Euros to 2500 Euros, so it's not really fair to compare them to one another. Starting with the cheapest printer which we tested, the XYZPrinting da Vinci Junior 1.0: this is certainly a great little ma...
Var denne anmeldelse nyttig?
-
Udgivet: 2015-11-16, Forfatter: James , anmeldelse af: Theinquirer.net
Cheap, easy to use, fine print quality, well-designed software
Flimsy case
Even with occasional bad prints, the da Vinci Jr left us seriously impressed. It's a great entry point into 3D printing for hobbyists and small businesses needing to rapidly build parts or prototypes.Indeed, XYZprinting has successfully built a simple but...
Superb ease of use, well-designed software, good print quality for the price
Occasional printing failures, flimsy case
Simple to set up, easy to operate and outstandingly cheap to buy, the da Vinci Jr is the best entry-level 3D printer around. The results aren't always perfect but there's no need to spend more for small models and basic components...
Is this the device that's finally going to bring 3D printing to the mass market? Absolutely not. Like every 3D printer we've seen so far, it's clunky, quirky and nowhere near capable of matching the quality of industrial injection-moulding.It's also limit...
The XYZprinting Da Vinci Jr. 3D Printer is easy to set up and use, requires no calibration and is currently the most inexpensive 3D printer on the market
The printer is relatively bulky considering its small build platform. It uses XYZprinting proprietary consumables and glue may be needed for it to offer a high success rate
The XYZprinting Da Vinci Jr. 3D Printer's low cost and high ease of use make it an ideal entry-level 3D printer for anyone....
Ready to use straight from the box, Fully encased print head and platform, Easy to use and replace cartridge filament
Closed software and hardware system, Only XYZprinting filament can be used, Print quality isn't the best
More suited to an educational environment than a home, the Da Vinci 1.0 is easy to set up and use, but models lack the finish of more expensive printers....
The XYZprinting Da Vinci 1.0 AiO 3D Printer works well both as a 3D printer and a 3D scanner. The machine has large print platform, it's ready to use right out of the box, and it's priced much lower than competing devices
The machine uses XYZprinting proprietary consumables, and you can't swap filaments during a print job. Its print-platform is not removable, making it hard to clean
Affordable, reliable, and easy to use, the XYZprinting Da Vinci 1.0 AiO 3D Printer is great leap toward making 3D printing available to the masses....
